Table of Contents
Advertisement
Collecting Data via USB Cable
To collect Internal Auditron data locally, you will need: a USB cable and a valid User
Number.
1. Locate the USB port on the machine.
2. Connect a USB cable between the USB port on the machine and the PC.
3. Select Start > Programs > Xerox Applications > WCPS Auditron Report Tool to
start the program.
The PC window will briefly display the configuration of the machine in the
4.
Connection Manager window. Select OK to close the Connection Manager
window. If you want the window to automatically close, check the Auto Close box.
If the PC is not connected to the machine at this time, no data will appear in the
Connection Manager window. Close the program, ensure the USB Cable is
properly connected, and try again.
Electronic Auditron Administration Report Software
CopyCentre C32/C40
WorkCentre Pro 32/40
Page 9 of 19
CopyCentre C2128/C2636/C3545
WorkCentre Pro C2128/C2636/C3545
Advertisement
Table of Contents
