Risco ShockTec 600S Installation Instructions

Installation Instructions

RISCO Group Limited Warranty

RISCO Group and its subsidiaries and af liates ("Seller") warra nts its products to be free from defects in materials and workmanship under normal use for 24 months
from the date of production. Because Seller does not install or connect the product and because the product may be used in conjunction with products not
manufactured by the Seller, Seller can not guarantee the performance of the security system which uses this product. Sellers obligation and liability under this
warranty is expressly limited to repairing and replacing, at Sellers option, within a reasonable time after the date of delivery, any product not meeting the
speci cations. Seller makes no other warranty, expressed or implied, and makes no warranty of merchantability or of tness for any particular pur pose. In no case
shall seller be liable for any consequential or incidental damages for breach of this or any other warranty, expressed or implied, or upon any other basis of liability
whatsoever. Sellers obligation under this warranty shall not include any transportation charges or costs of installation or any liability for direct, indirect, or
consequential damages or delay. Seller does not represent that its product may not be compromised or circumvented; that the product will prevent anypersona; injury
or property loss by intruder, robbery, re or otherwise; or that the product will in all cases provide adequate warning or protection. Buyer understands that a properly
installed and maintained alarm may only reduce the ri sk of intruder, robbery or re without warning, but is not insurance or a guaranty that such will not occur or
that there will be no personal injury or property loss as a result. Consequently seller shall have no liability for any personal injury, property damage or loss based on
a claim that the product fails to give warning. However, if seller is held liable, whether directly or indirectly, for any loss or damage arising from under this limited
warranty or otherwise, regardless of cause or origin, sellers maximum liability shall not exceed the purchase price of the product, which shall be complete and
exclusive remedy against seller. No employee or representative of Seller is authorized to change this warranty in any way or grant any other warranty.
WARNING: This product should be tested at least once a week.

UKCA and CE EMC Compliance Statement

Hereby, RISCO Group declares that this equipment is in compliance with the essential requirements of the UKCA Electromagnetic Compatibility
Regulations 2016 and CE Directive 2014/30/EU.
For the UKCA and CE Declaration of Conformity please refer to our website: www.riscogroup.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modi cations to this equipment which are not expressly approved by the party responsible for compliance (RISCO Group's.) could void the user's authority to operate
the equipment.

FCC Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment on and o , the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on to a di erent circuit from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Ajustement de la sensibilité