You can also set any mode key (except
TV) to become an “X10” key. You could
for example make AUX an X10 key.
Pressing this key then puts you in X10
mode and lets you control all 16 X10
Modules (set to the same Housecode as
the remote), as follows.
1 . 1 . 1 . 1 . 1 . Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2 . 2 . 2 . 2 . 2 . Press and release
any mode button
(except TV), e.g.
AUX.
3 . 3 . 3 . 3 . 3 . Press 999.*
Once in X10 mode you can control any
X10 Module by pressing the number
button corresponding to its Unit Code,
followed by the appropriate function key
as follows:
X10 FUNCTIONS:
On:
CHANNEL +
Off:
CHANNEL –
Bright:
VOLUME +
Dim:
VOLUME –
All Lights On:
POWER
All Units Off:
MUTE
Notes: You cannot dim or brighten an
Appliance Module. If the module was off
and you press Bright or Dim (VOLUME +
or VOLUME -) this will simply turn the
module on.
* The above procedure sets the remote
to transmit X10 RF codes to any X10
Transceiver. If you want it to transmit X10
IR codes to an IR543 Console press 998
in step 3 above instead of 999.
1 8
1 8
1 8
1 8
1 8