Table of Contents
Advertisement
C C C C C
ONTROLLING
ONTROLLING
AN
AN
OPTIONAL
OPTIONAL
ONTROLLING
ONTROLLING
ONTROLLING AN
AN
AN OPTIONAL
OPTIONAL
OPTIONAL
IR M
IR M
IR M
C C C C C
(IR543)
(IR543)
(IR543)
IR M
IR M
(IR543)
(IR543)
INI
INI
INI
ONTROLLER
ONTROLLER
ONTROLLER
INI
INI
ONTROLLER
ONTROLLER
If you already own an IR Mini Controller,
Model IR543, you will need to change
the X10 Home Automation code in the
UR81A remote to use it. The code for
standard X10 RF Home Automation is
999. The code to control the IR Mini
Controller is 998. To change the code:
1 . 1 . 1 . 1 . 1 . Press and hold SETUP until the LED
indicator lights steadily. Release the
SETUP button.
2 . 2 . 2 . 2 . 2 . Press and release the X10 button.
3 . 3 . 3 . 3 . 3 . Enter 998 to control an IR543, IR
Mini Controller, or 999 for standard
X10 control. The LED turns off after
the last digit entered.
2 2 2 2 2
1 1 1 1 1
3 3 3 3 3
2 0
2 0
2 0
2 0
2 0
If you use an RF Transceiver (such as the
RR501 or TM751) to control X10
Modules, you will be able to control up
to 16 Modules. When using a
Transceiver, when you press 1-6-ON you
turn on Module number 16. However, if
you use an IR543, when you press 1-6-
ON you turn on Modules 1 AND 6. The
IR543 can only control 10 Modules (1-9
plus 0=10).
Note:
Note:
Note:
Note:
Note: In most cases, you will not need
to use the IR Mini Controller to receive
commands from the UR81A Remote - the
RF Transceiver Module does this for you
and has the added advantage of
working through walls. You can if you
wish control the IR Mini Controller and
the Transceiver Module at the same time.
To do this store code 999 under the X10
key and store 998 under any other mode
key (except TV), e.g. AUX.
2 1
2 1
2 1
2 1
2 1
Hide quick links:
Advertisement
Table of Contents
