Fabric Freshener Care; Cleaning The Fabric Freshener - Whirlpool LRF4001RY Use And Care Manual

NOTE: The cup you receive with your Fabric Freshener may vary
in design from what is shown here.
Cycle cup for distilled water only
2. Replace cycle cup into cup receptacle. Press down on the
cycle cup to be sure cycle cup is firmly in place.
3. Close bag zipper completely.
When you have finished using your Fabric Freshener, you may
wish to close and store the Fabric Freshener.

Cleaning the Fabric Freshener

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
10

FABRIC FRESHENER CARE

IMPORTANT: To ensure proper performance, always keep bag
closed while Fabric Freshener is operating.
4. Press and hold the ON/OFF button for approximately
1 second while the Start/Steaming indicator light glows. The
freshening cycle will begin.
NOTES:
Sounds from the internal fan are normal during operation.
The temperature and humidity in the immediate surrounding
area may increase slightly.
Start/Steaming, Gentle Drying, Cooling, and Complete indicator
lights will light as each cycle progresses through each stage.
Once the Complete indicator light is lit, the cycle is complete and
you may remove your items.
NOTE: After a period of inactivity, the Complete indicator light will
turn off and the Fabric Freshener will go into a sleep mode until
the ON/OFF button is pushed again.
Stop Fabric Freshener
To stop the Fabric Freshener and reset cycle:
Press and hold the ON/OFF button for approximately
1 second, or until all indicator lights are off.
1. Unplug Fabric Freshener from outlet.
2. Remove any garment(s) that may remain in Fabric Freshener.
3. Clean sensors with a damp cloth.
A. Sensors located on floor of Fabric
Freshener on either side of exhaust grille
4. Clean surfaces with a damp cloth.
NOTE: Do not use chemical or abrasive cleaners.
A