Installation Requirements; Tools And Parts; Options - Whirlpool WFW9500TC Use And Care Manual

Duet steam series front-loading automatic washer
Table of Contents

Advertisement

Available languages

Available languages

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to 1
9
16
Flashlight (optional)
Tools needed for installation
Open end wrenches 17 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied:
A
D
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance or Service" section.
If You Have
You Will Need to Buy
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96" (2.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector kit,
Part Number 285835
Drain hose too
4 ft (1.2 m) drain hose extension kit,
short
Part Number 285863
Water faucets
2 longer water fill hoses:
beyond reach of fill
6 ft (1.8 m) Part Number 76314,
hoses
10 ft (3.0 m) Part Number 350008
4

INSTALLATION REQUIREMENTS

" [39.5 mm])
B
C
E
D. Transport bolt hole plug (4)
E. Beaded strap
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (121.9 cm) or 53.5" (135.9 cm), respectively.
A
A. 10" (25.4 cm) pedestal
B. 15.5" (39.4 cm) pedestal
To order, call the dealer from whom you purchased your washer
or refer to the "Assistance or Service" section.
Pedestal
Color
Height
10" (25.4 cm)
White
10" (25.4 cm)
Black
10" (25.4 cm)
Diamond Dust (Silver)
15.5" (39.4 cm)
White
15.5" (39.4 cm)
Black
15.5" (39.4 cm)
Diamond Dust (Silver)
15.5" (39.4 cm)
New Aspen (Green)
15.5" (39.4 cm)
Tuscan Chestnut
15.5" (39.4 cm)
Ocean Sapphire
15.5" (39.4 cm)
Metallic Red
15.5" (39.4 cm)
Oxide
15.5" (39.4 cm)
Emerald Green
15.5" (39.4 cm)
Burgundy
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section. Ask for Part
Number 8541503.

Options

B
Part Number
WHP1000SQ
WHP1000SB
WHP1000SU
XHP1550VW
XHP1550VB
XHP1550VU
XHP1550VA
XHP1550VC
XHP1550VE
XHP1550VF
XHP1550VJ
XHP1550VP
XHP1550VM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents