Quick Start Guide; Stopping Your Dryer; Pausing Or Restarting - Whirlpool Duet Steam WED9270X Use And Care Manual

WARNING: To reduce the risk of fire electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
This Use and Care Guide covers several different models. Your dryer may not have all the cycles and features described.
USING AUTOMATIC CYCLES
Automatic Cycles automatically match
the cycle setting to the type of load and
adjust drying time for optimal performance.
See the Cycles information on the following
pages for more detail on each cycle.
1. Clean lint screen.
2. Place laundry in the dryer. Shut the door.
3. Press POWER.
4. Select the desired AUTOMATIC cycles.
5. Adjust the DRYNESS level, if desired.
6. Select the WRINKLE SHIELD™ (90) and/or SIGNAL feature,
if desired.
7. Press and Hold START/PAUSE to begin.
To add or remove options during an Automatic Cycle:
You may select or deselect the WRINKLE SHIELD™ (90) and/or
SIGNAL feature at any time during the cycle, if desired.
USING STEAM CYCLES
Steam Cycles use water and heat to
reduce wrinkles and odors in dry items.
See the Cycles information on the following
pages for more detail on each cycle.
1. Press POWER.
2. Select a Steam cycle.
3. Press and hold START/PAUSE to begin.

QUICK START GUIDE

STEAM CYCLE
QUICK
TIMED DRY
ENHANCED REFRESH
TOUCH UP
USING TIMED CYCLES
Use Timed Cycles to set a drying
time and temperature. See the
Cycles information on the following
pages for more information.
1. Clean lint screen.
2. Place laundry in the dryer. Shut the door.
3. Press POWER.
4. Select the desired TIMED cycles.
5. Press MORE TIME or LESS TIME until the desired drying
time is displayed.
6. Press TEMP until the desired temperature glows.
7. Select the WRINKLE SHIELD™ (90) and/or SIGNAL feature,
if desired.
8. Press and Hold START/PAUSE to begin.
To add or remove options during a Timed Cycle:
You may select or deselect the WRINKLE SHIELD™ (90) and/or
SIGNAL feature at any time during the cycle, if desired.

Stopping Your Dryer

To stop your dryer at any time
Press POWER.

Pausing or Restarting

To stop the dryer at any time
Open the door or press START/PAUSE once.
To restart the dryer
Close the door and press and hold START/PAUSE
Steam
Control Lock
Sensing Wet Damp Cool Done Wrinkle
Down Shield
5