Attaching The Base Stand To The Lcd Monitor; Connect Audio And Video Cables To Apc - Westinghouse LCM-19v7 User Manual

Installation

1. Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in
and snap into place. To remove the base stand, press the tabs on the bottom of the stand
neck and remove the base.
2.
Connect Audio and Video Cables to a PC
Connect one or all of the following into the back of the LCD Monitor
IMPORTANT: Before beginning,
AUDIO CONNECTION:
to the AUDIO-IN port on the LCD Monitor.
DVI-D CONNECTION:
DVI-D port. To plug a DVI cable into the port, remove the plastic cover below the port.
VGA CONNECTION:
the LCD Monitor D-SUB port.
make sure all devices are turned off.
Connect a stereo mini cable from the PC's AUDIO-OUT port
Connect a Digital DVI cable from your PC to the LCD Monitor
Connect an analog VGA cable from your PC VGA OUT port to
8