Safety instructions
A
NOTICE! Damage hazard
Check that the voltage specification on the data plate is the
same as that of the power supply.
Connect the device to the AC mains using the AC cable.
Never pull the plug out of the socket by the connection cable.
2.2
Operating the device safely
!
CAUTION! Failure to obey these cautions could result in
minor or moderate injury.
Before starting the device, ensure that the power supply line
and the plug are dry.
A
NOTICE! Damage hazard
Do not place it near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
Do not operate the device over the maximum working pressure
of 30 bar on the magnetic valve.
8
RefrigerantScale
EN