Setting Up Vpn Manager Access - Watchguard Firebox SOHO 6 Wireless User Manual

8 Install and configure the MUVPN client on the remote
computer.
For this information, see Chapter 10 "MUVPN Clients" on page 121.
9 Use Dial-Up Networking or a LAN or WAN connection to
connect to the Internet.
Perform the following steps from the Windows desktop system
tray:
10 Verify that the MUVPN client has been activated. If the
MUVPN client has not been activated, right-click the icon and
select Activate Security Policy.
For information on how to determine the status of the MUVPN icon, see
"The MUVPN client icon" on page 150.
11 Right-click the icon and select Connect.
The WatchGuard Mobile User Connect window appears.
12 Click Yes.
13 Type the IP address of the SOHO 6 Wireless external network
in your browser window to connect to the System Status page.

Setting up VPN Manager Access

The VPN Manager Access page configures the SOHO 6 Wireless to
allow remote configuration of the SOHO 6 Wireless by the
WatchGuard VPN Manager software. The WatchGuard VPN
Manager software configures and manages VPN tunnels.
The VPN Manager software is a separate product and must run on
a WatchGuard Firebox II/III. Additional information about the
VPN Manager product is available on the WatchGuard Web site:
https://www.watchguard.com/products/vpnmanager.asp
User Guide
Setting up VPN Manager Access
67