The Base Model Soho 6 Wireless; Registering Your Soho 6 Wireless And Activating The Livesecurity Service - Watchguard Firebox SOHO 6 Wireless User Manual

Registering your SOHO 6 Wireless and Activating the LiveSecurity Service

3 Connect the power supply.
4 Continue to hold the reset button until the red LED on the front
of the SOHO 6 Wireless goes on and goes off.
5 Disconnect the power supply.
6 Connect the power supply.
The PWR indicator is on and the reset is complete.

The base model SOHO 6 Wireless

The base model SOHO 6 Wireless includes a ten-seat license. This
license allows a maximum of ten computers on the trusted
network to connect to the Internet at the same time. There can be
more than ten computers on the trusted network, but the SOHO 6
Wireless will only allow ten Internet connections. See "Cabling the
SOHO 6 Wireless for more than four appliances" on page 26 for
additional information.
Registering your SOHO 6 Wireless and
Activating the LiveSecurity Service
After the SOHO 6 Wireless is installed and configured, register the
SOHO 6 Wireless and activate your LiveSecurity Service
subscription. LiveSecurity Service provides threat alert
notifications, security advice, free virus protection, software
updates, technical support by Web or telephone, and access to
online help resources and the WatchGuard user forum. A
subscription to the LiveSecurity Service is required to get the
license keys for the upgrades that you purchase.
You must have the serial number of your SOHO 6 Wireless to
register. The SOHO 6 Wireless serial number is located on the
User Guide 37