Watchguard Firebox SOHO 6 Wireless User Manual page 50

Chapter 2: Installation
0-3). To connect a maximum of four appliances, use the SOHO 6
Wireless as a network hub.
1 Shut down your computer.
2 If you connect to the Internet through a DSL modem or cable
modem, disconnect the power supply to this device.
3 Disconnect the Ethernet cable that connects your DSL modem,
cable modem, or other Internet connection to your computer.
Connect this cable to the WAN port on the SOHO 6 Wireless.
The SOHO 6 Wireless is connected directly to the modem or other Internet
connection.
4 Connect one end of the straight-through Ethernet cable
supplied with your SOHO 6 Wireless to one of the four
numbered Ethernet ports (labeled 0-3) on the SOHO 6
Wireless. Connect the other end to the Ethernet port of your
computer.
The SOHO 6 Wireless is connected to the Internet and your computer.
24 WatchGuard Firebox SOHO 6 Wireless