Enabling Your Computer For Dhcp - Watchguard Firebox SOHO 6 Wireless User Manual

2 Select Tools = > Internet Options.
The Internet Options window appears.
3 Click the Advanced tab.
4 Scroll down the page to HTTP 1.1 Settings.
5 Clear all of the checkboxes.
6 Click OK.

Enabling your computer for DHCP

To open the configuration pages for the SOHO 6 Wireless,
configure your computer to receive its IP address through DHCP.
See "Network addressing" on page 41 for more information about
network addressing and DHCP.
These configuration instructions are for the Windows 2000 operating
system.
1 Select Start => Settings = > Control Panel.
The Control Panel Window appears.
2 Double-click the Network & Dial-up Connections icon.
3 Double-click the connection you use to connect to the Internet.
The network connection dialog box appears.
4 Click Properties.
The network connection Properties dialog box appears.
User Guide
N
OTE
Before you Begin
21