Is The Muvpn Tunnel Working; My Mapped Drives Have A Red X Through Them; How Do I Map A Network Drive - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 10: MUVPN Clients
transmission of the login information. Make sure you deactivate
ZoneAlarm each time you disconnect the MUVPN connection.

Is the MUVPN tunnel working?

The MUVPN client icon appears in the Windows desktop system
tray after the application has been launched. The MUVPN client
displays a key in the icon when the client is connected.
To test the connection, ping a computer on your company network.
• Select Start => Run and then type
address of a computer on your company network.

My mapped drives have a red X through them...

Windows 98/ME, NT, and 2000 verify and map network drives
automatically when the computer starts. Because you cannot
establish a remote session with the company network before the
computer starts, this process fails. This causes a red X to appear on
the drive icons. To correct this problem, establish a MUVPN tunnel
and open the network drive. The red X for that drive should
disappear.

How do I map a network drive?

Due to a Windows operating system limitation, mapped network
drives must be remapped when you work remotely. To remap a
network drive from the Windows desktop:
1 Right-click Network Neighborhood.
2 Select Map Network Drive.
The Map Network Drive window appears.
3 Use the drop-down list to select a drive letter.
Select a drive from the drop-down list or type a network drive path.
4 Click OK.
162
ping
followed by the IP
WatchGuard Firebox SOHO 6 Wireless