Setting Up Vpn Manager Access - Watchguard Firebox SOHO 6 User Manual

9 After you have installed and configured the MUVPN client,
connect to the Internet using Dial-Up Networking or a LAN or
WAN connection.
From the Windows desktop system tray, follow these steps:
10 Verify that the MUVPN client has been activated. If the
MUVPN client has not been activated, right-click the icon and
select Activate Security Policy.
For information on how to determine the status of the MUVPN icon, see
"The MUVPN client icon" on page 133.
11 Right-click the icon and select Connect.
The WatchGuard Mobile User Connect window appears.
12 Click Yes.
13 Type the IP address of the SOHO 6 external network in your
browser window to connect to the System Status page.

Setting up VPN Manager Access

The VPN Manager Access page configures the SOHO 6 to allow
remote configuration of the SOHO 6 by the WatchGuard VPN
Manager software. The WatchGuard VPN Manager software
configures and manages VPN tunnels.
The VPN Manager software is a separate product and must run on
a WatchGuard Firebox II/III. Additional information about the
VPN Manager product is available on the WatchGuard Web site:
https://www.watchguard.com/products/vpnmanager.asp
Follow these instructions to configure VPN Manager access:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
User Guide
Setting up VPN Manager Access
53