HermanMiller Ode Quick Start Manual

HermanMiller
Ode Table Top Lamp ™

How to assemble your table lamp.

Step 1
Connect power supply cord to table lamp assembly.
Herman Miller Ode Lamp

Parts Included

A. Table Lamp B. Power Supply
Step 2
Place lamp on desired work surface, making sure power supply and cord
are properly routed. Plug power supply into a standard electrical outlet.
Note: After connecting power to
the unit, there will be a 5 second
delay before the lamp can be
turned on via touch sense.

To operate lamps:

Grasp any part of the stem to turn lamps
on or off. Table lamps also have a dimming
function; after a table lamp has been
turned on, grasp the stem again to dim,
then once more to turn it off.
NOTE: By design light automatically shuts
off after nine hours.
For Example: The light is turned on and runs for
two hours before being turned off. The light is
then turned on again so now it will continue to
run for an additional seven hours and then will
turn off automatically.
1 Part # 1BG8WL Rev. F Assembly Instructions