Pioneer CT-W851R Operating Instructions Manual page 19

(1) (2)2.~=«27
1. Load the tape(s} for playback.
®
Timer playback always begins in the forward direction. Make
sure that the tape(s} are properly rewound
. Set the DOLBY NR switchies).
. Set the REV MODE switch.
4. Set the stereo amplifier for tape playback.
® Adjust the volume level by playing back a portion of the tape.
5. Rewind the tape to the position where playback is to
start.
6. Set the audio timer.
© When the timer is set, it will turn off the power of all con-
nected components.
7. Set the TIMER switch to the PLAY position.
® At the time set on the audio timer, the power will be turned
on and playback will begin automatically.
WN
NOTES:
CT-W851R/CT-W801R/CT-W701R: DECK | and/or DECK II
CT-W601R: DECK HI only
(1) 3(2)2 FS
1. Load the tape(s) for recording.
® Timer recording always begins in the forward direction. Make
sure that the tape is properly rewound.
. Set the DOLBY NR switches.
. Set the REV MODE switch.
. Prepare the audio source.
® Set the amplifier input selector to tuner, then tune in the
desired station.
5. Press the recording (@) button.
6. Adjust the recording level.
7. Set the audio timer.
© When the timer is set, it will turn off the power of all con-
nected components.
8. Set the TIMER switch to the REC position.
© At the preset time, the power will be turned on, and record-
ing will begin automatically.
PWN
NOTES:
19
<RRBI120>
En