Download Print this page
Bensons for Beds Annabelle STK804405 Assembly Instructions Manual

Bensons for Beds Annabelle STK804405 Assembly Instructions Manual

180cm bed with gas lift and storage

Advertisement

Quick Links

Minimum Two
Persons Assembly
90 MIN
Approximate
Assembly Time
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
Important information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame (Head End- Foot End- side Rails).
Product information
— Upholstered Bed Using Fabric Material.Conforms to BS EN1725 & BS 5852.
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener .
— Periodically dust lightly with a clean soft cloth.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR,AS THIS WILL CAUSE DAMAGE TO THE JOINTS.
KT00-12/05/2023
Annabelle 180CM Bed with Gas Lift and Storage
STK804405/STK804406
Assembly instructions
Please keep these instructions for future reference.
Page 1 of 21

Advertisement

loading
Need help?

Need help?

Do you have a question about the Annabelle STK804405 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bensons for Beds Annabelle STK804405

  • Page 1 Annabelle 180CM Bed with Gas Lift and Storage Minimum Two STK804405/STK804406 Persons Assembly Assembly instructions Please keep these instructions for future reference. 90 MIN Approximate Assembly Time Regrettably self-assembly items cannot be returned once assembly is part or fully completed unless the items are found to be faulty.
  • Page 2 Components of Carton A Base Shelf x 2 Headboard x 1 Please Note components are contained in the rear of the Headboard . Please carefully turn the Headboard over and remove before assembly is started Components of Carton B Footboard x 1 Left Wing x 1 Right Wing x 1 Mattress Stopper x 2...
  • Page 3 Components of Carton B Left Lifting Arm x 1 Wooden Slats x 51 Right Lifting Arm x 1 Gas Lift x 2 Strap x 1 Slatted Base Lock Buckle x 1 Footboard Lock Bed Frame Support Buckle x 1 Bar x 2 Short Support Leg x 1 Base Support x 4 Right Bracket x 1...
  • Page 4 Components of Carton C Left Side Panel x 1 Right Side Panel x 1 Front Tube x 1 Back Tube x 1 Cross Rail x 1 Centre Rail x 2 Support Rail x 1 Side Rail x 2 Support Rail x 4 Bottom Centre Rail x 1 Single Slat Cap x 34 +2 pcs...
  • Page 5 Hardware List in Carton B M6 x 15MM x 10 M6 x 20MM x 68 M6 x 35MM x 8 M6 x 40MM x 13 M6 x 4 M8 x 4 M6 x 8 M8 x 65MM x 4 ALLEN KEY 4MM x 1 WRENCH x 1 M8 x 30MM x 4 Step 1...
  • Page 6 Step 2 Å Lift up the back covering which is held in place by Velcro strip. Å Attach Left Wing and Right Wing to Headboard Tighten completely all bolts. ensure the wings are flush and aligned with the headboard. Page 6 of 21...
  • Page 7 Step 3 Å Replace the back cover and secure by pressing the two velcro strips together velcro Page 7 of 21...
  • Page 8 Step 4 Do not completely tighten the bolts, leave Å Attach Base Support to Headboard half of the bolt exposed. Using 20mm Bolt and Allen Key as shown. Å Bolt onto Incorrect installation method M6X20mm M6X35mm C X4 I X1 Step 5 Do not completely tighten the bolts, leave half of the bolt exposed.
  • Page 9 Step 6 Å Attach Right Bracket to Right Side Panel and Left Bracket to Left Side Panel Using 20mm Bolt and Allen Key as shown. M6X20mm Page 9 of 21 I X1...
  • Page 10 Step 7 Do not tighten the bolts fully until step 12. Step 8 Å Attach Corner Bracket to Leg Using 30mm Bolt and Allen Key as shown. 100% M8X30mm Page 10 of 21 I X1...
  • Page 11 Step 9 Å With assistance lift the base and Attach corner bracket with leg 2 3 4 Using 20mm Bolt and Allen Key as shown. M6X20mm I X1 BX16 Step 10 Å Attach Bottom Centre Rail Using 20mm Bolt and Allen Key as shown.
  • Page 12 Step 11 Å Attach Support Rail Using 15mm Bolt and Allen Key as shown. M6X15mm I X1 Step 12 Å Attach Support Rail Using 15mm Bolt and Allen Key as shown. Å 13 15 Attach Short Support Leg Using 40mm Bolt and Allen Key as shown.
  • Page 13 Step 13 Å Attach Gas Lift to Right Lifting Arm Using M8 Nut and Wrench as shown. Incorrect: The orientation of part is upside down. J X1 Step 14 Å Attach Gas Lift to Left Lifting Arm Using M8 Nut and Wrench as shown.
  • Page 14 Step 15 Å Attach Using 20mm Bolt ,M6 Washer and Allen Key as shown. M6X20mm I X1 Step 16 Page 14 of 21...
  • Page 15 Step 17 Step 18 Å Attach Centre Rail Using 20mm Bolt and Allen Key as shown. Å Attach Side Rail Using 35mm Bolt , M6 Nut Allen Key , Wrench as shown. M6X20mm M6X35mm Page 15 of 21 C X4 F X 4 I X1 J X1...
  • Page 16 Step 19 Å Attach Cross Rail Using 20mm Bolt and Allen Key as shown. M6X20mm I X1 Step 20 Å Attach Cross Rail Using 40mm Bolt and Allen Key as shown. Turn around the bedbase frame M6X40mm Page 16 of 21 I X1...
  • Page 17 Step 21 Å Attach Hinge Using 20mm Bolt and Allen Key as shown. Å Attach Strap M6X20mm I X1 Strap installation steps Step 22 Å Attach Mattress Stopper Using 20mm Bolt and Allen Key as shown. M6X20mm Page 17 of 21 I X1...
  • Page 18 Step 23 Å 23.1 Insert Wooden Slats into Single Slat Cap 23.2 Press Single Slat Cap into Side Rail , repeat the same procedure for the opposite side. 23.3 Insert ends of both Wooden Slats into Double Slat Cap ,then press Double Slat Cap into Centre Rail as illustrated.
  • Page 19 Step 24 Å Gently place Base Shelf inside the assembled bed base. Step 25 Å Attach bed frame Support Bar Using 65mm Bolt and Allen Key as shown. M8X65mm Page 19 of 21 I X1...
  • Page 20 Step 26 Å Close base and attach safety Buckle Page 20 of 21...
  • Page 21 ---WARNING: PLEASE DO NOT ALLOW CHILDREN OR PETS INSIDE THE STORAGE AREA. ---WARNING: PLEASE BE CAREFUL WHEN LIFTING. ONLY LIFT WITH MATTRESS ON TOP. TO BE OPERATED BY ADULTS ONLY. ---WARNING: PLEASE DO NOT PRESS DOWN ON THE MATTRESS WHEN THE BED FRAME IS IN THE LIFT UP POSITION.

This manual is also suitable for:

Annabelle stk804406