Best of all, the VP400 works on 110 volts. Built with a commercial grade, 1.5 hp oil pump to deliver a quality vacuum in 20-30 seconds saving you time for each cycle.
Page 3
Adding Oil to Vacuum Pump Turn off and unplug machine to prevent electrocution. Using VacMaster approved 10W non-detergent hydraulic oil, fill the enclosed plastic oil bottle. Locate the oil fill bolt (A) on the top of the vacuum pump.
45 minutes. 15. This appliance is for commercial use only. VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
▫ Delicate foods can be frozen prior to packaging to protect them from getting crushed by the vacuum. ▫ Use VacMaster® Bone Guards to cover an item’s sharp edges to prevent pouch punctures. ▫ Allow foods and liquids to cool to room temperature before vacuum packaging.
Control Panel Seal Bars (Not Pictured) - Four (4) 16” Double Wire Seal Bars (2 in each chamber) VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Program Button - Use to program 10 unique vacuum and seal time cycles VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Do not use machine until oil has been added. Vacuum Pump Maintenance The VP400 vacuum pump requires periodic oil changes. Required oil change schedule: ▫ First oil change: 1 week after use. ▫ Future oil changes: every 3 months or 250 cycles.
Page 9
“ON” position. To power OFF, rotate switch to the “OFF” position. Set Up - Adjusting the VP400 Timing Controls NOTE: All timing adjustments must be made with the lid lock off and the lid open. To adjust/set the timing controls, press the SET button on the control panel until the required label (Vacuum, Sealing or Cooling) is illuminated.
Page 10
COOLING is illuminated and then use the UP/DOWN buttons to adjust the cooling time accordingly. NOTE: The VP400 settings will always default to the most recently used settings on the machine To prolong the life of your seal bar, set the TIP: cooling time to twice the sealing time.
Page 11
Lid Release Runs for a set time - counting down to zero Indicates the end of the process. VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Page 12
6. Replace the spring and gasket, making sure the gasket is still in good condition. 7. Re-attach the end cap with the 4 screws. 8. Filter re-assembly is complete. VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Page 13
How to Use Programmable Vacuum Cycle Instructions This VacMaster chamber vacuum sealer is now equipped with a new feature that allows you to program and store up to 10 different seal cycle settings. Changing from liquids to solids to delicate items has never been easier to get that perfect amount of vacuum and a double seal for an additional layer of protection.
Page 14
Please scan the QR code for an instructional video on the programmable functions. VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Vacuum pouch loses vacuum after being sealed - ▫ Sharp items can poke small holes in pouches. To prevent this, cover sharp edges with VacMaster" Bone Guard and vacuum in a new pouch. ▫ Some fruits and vegetables can release gases (outgassing) if not properly blanched or frozen before packaging.
Wipe the gasket clean. c. Wipe the seal area clean. ▫ Do not store the VP400 outside. 65° to 75° recommended. ▫ DO NOT use any acetone-based or abrasive cleaners on the lid or other plastic parts. Only clean lid with a damp cloth and mild soap.
NOTE: ▫ All perishable foods must be refrigerated or frozen. VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
979925 Pin/Clip Set 2 sets Clip Limit plate Wire joint Rubber tube .05 meter 979941 Lid gasket VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Page 19
Press strip 921780 Valve, combined (solenoid) Joint O ring Clip M10x1 Joint Circle-C Level O ring Right plate VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Page 20
977264 Tubing 2 ft Door buckle double couplet Steel wire binding tool Cross-headed screw Stainless steel nameplate VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Packaging Information With the VP400, you can easily package a wide variety of sizes and shapes. You can also prep and store smaller individual serving portions as well as bulk items. ▫ Keeps food fresh 3-5 times longer than conventional storage bags.
Check out our YouTube channel Check out our Blog vacmasterfresh.com/fresh-bites-blog youtube.com/MyVacMaster We’re also on Facebook: https://www.facebook.com/vacmasterfresh Twitter: https://twitter.com/VacMasterFresh Instagram: https://www.instagram.com/vacmasterfresh VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Register your product and get technical support at: www.vacmasterfresh.com/product-registration/ vacmasterfresh.com/contact-us/ VP400 Chamber Vacuum Sealer | User Guide ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849...
Page 24
A Product of P.O. Box 412888 Kansas City, MO 64141 VacMasterFresh.com 800.821.7849 All Rights Reserved. VacMaster is a trademark or registered trademark of ARY, Inc. in the United States and other countries. ®...
Need help?
Do you have a question about the VP400 and is the answer not in the manual?
Questions and answers