Personal Identification Number (Pin) - VTech 6032 User Manual

answering system operation

Personal identification number (PIN)

A four-dgt securty code s requred for remote access to the answerng
system from any touch tone telephone. The factory default code s 0000.
To change the PIN on your telephone:
• Press MENU/SELECT on the handset n dle mode.
• Press or to reach SETUP BS. Press MENU/SELECT.
to reach CHaNgE ITaD PIN. Press MENU/SELECT.
• Press or
• The screen dsplays ENTEr PIN.
• Enter the PIN (default 0000) and press MENU/SELECT.
• The screen dsplays NEw PIN.
• Enter the desred PIN and press MENU/SELECT.
• The screen dsplays rEPEaT PIN.
• Enter the new PIN agan and press MENU/SELECT.
• The screen dsplays STorED and you'll hear a confirmation beep
(f KEy ToNE s on).
If a wrong PIN s entered, the screen dsplays wroNg PIN, retry
•
after two seconds.
www.vtechphones.com
cHANGe ItAd PIN
dIAl tYPe
eNter PIN
eNter PIN
****
New PIN
rePeAt PIN
29