Before Operating Your Dryer; Temperature Selection; Operating Steps - Frigidaire Fleb8200Ds0 Operating Instructions

COOL
DOWN
20
30
40
50
60
70
COOL
TIMED DRY
DOWN

Before Operating Your Dryer

Read your Owner's Guide. It has important safety
and warranty information. It also has many suggestions
for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your owner's guide before
operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
Printed in U.S.A.
DRYER OPERATING INSTRUCTIONS
AUTOMATIC
START
PERM PRESS
PRESS SAVER /
FABRIC SENTRY
MORE DRY
LESS DRY
AUTOMATIC
REGULAR
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperature controls.
6. Turn cycle selector clockwise to desired setting.
7. Start dryer. Turn Start control clockwise to ON.
Hold for 1-2 seconds and release.
8. A signal will sound when the cycle ends.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
START
ON

Temperature Selection

Always follow directions on fabric care labels.
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
Air Fluff-No Heat setting only.
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT temp-erature
settings may be used with any cycle setting. The AIR
FLUFF-NO HEAT setting can be used only in the Timed
Dry cycle.
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
TEMPERATURE
KNITS/DELICATES PERM PRESS
MEDIUM HEAT
LOW HEAT
AIR FLUFF REGULAR
NO HEAT HIGH HEAT
To avoid fire hazard, do not use heat to
P/N 134089600 (0108)