Tx Power; Gnss Antenna Interface; General Description; Gnss Frequency - Quectel RM520N-GL Hardware Design

5.1.3. Tx Power

The following table shows the RF output power of the module.
Table 31: Cellular Output Power
Mode Frequency
WCDMA WCDMA bands
LTE bands
LTE
LTE HPUE bands
(B38/B41/B42/B43)
5G NR bands
5G NR
5G NR HUPE bands
(n38/n40/n41/n77/n78/n79)

5.2. GNSS Antenna Interface

5.2.1. General Description

The module includes a fully integrated global navigation satellite system solution (GPS, GLONASS, BDS,
Galileo and QZSS).
The module supports standard NMEA-0183 protocol, and outputs NMEA sentences at 1 Hz data update
rate via USB interface by default.
The GNSS engine is switched off by default. It has to be switched on via AT command.

5.2.2. GNSS Frequency

Table 32: GNSS Frequency
Bands Type
GPS/Galileo/QZSS
L1
Galileo
16
For 5G NR TDD bands, the normative reference for this requirement is TS 38.101-1 clause 6.3.1.
RM520N-GL_Hardware_Design
Max.
24 dBm +1/-3 dB (Class 3)
23 dBm ± 2 dB (Class 3)
26 dBm ± 2 dB (Class 2)
23 dBm ± 2 dB (Class 3)
26 dBm +2/-3 dB (Class 2)
Frequency
1575.42 ± 1.023 (L1)
1575.42 ± 2.046 (E1)
5G Module Series
Min.
< -50 dBm
< -40 dBm
< -40 dBm
16
< -40 dBm
16
< -40 dBm
Unit
MHz
MHz
60 / 84