Page 1
INSTALLATION INSTRUCTIONS VOLT LOW VOLTAGE LANDSCAPE LIGHTING ® VOLT Mini Round Wall Wash ® ITEM: VFL-4027 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Page 2
INSTALLATION INSTRUCTIONS VOLT Mini Round Wall Wash - VFL-4027 ® IMPORTANT: PLEASE READ BEFORE INSTALLATION This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
PACKAGE CONTENTS A. (1) Fixture Body PARTS REQUIRED A. (1) G4 Bulb B. Mounting Accessory PRODUCT DIMENSIONS 1.83” 3.14” 1” REMOVE LENS Loosen the lens and remove it from the fixture body by rotating it counter-clockwise. Lens Fixture Body 813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com...
Page 4
INSTALLATION INSTRUCTIONS VOLT Mini Round Wall Wash - VFL-4027 ® INSTALL G4 BULB Insert G4 bulb with correct wattage and type marked on Socket fixture label. CAUTION: Do not exceed G4 Bulb maximum wattage marked on luminaire label. INSTALL LENS...
Page 5
Install Fixture Body to Stake Pass fixture wire through the Fixture Body stake and thread the stake onto the fixture body. Screw the lock ring against the stake and hand tighten until snug. Lock Ring Stake Fixture Wire Install Stake Determine the desired location for mounting the fixture.
Page 6
INSTALLATION INSTRUCTIONS VOLT Mini Round Wall Wash - VFL-4027 ® WIRE CONNECTION Pigtail Wire Connectors Main Supple Cable Strip both the leads from the luminaire pigtail. Using two UL listed wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.
Need help?
Do you have a question about the VFL-4027 and is the answer not in the manual?
Questions and answers