Bosch C40-Li Operating Instructions Manual page 5

Charger Bosch C40-Li I Operating instructions
2 Safety
Before use your charger, please read all instructions carefully.
CAUTION
I
◾ If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent in order to avoid a hazard.
◾ Disconnect the supply before making or breaking the connections to the battery.
◾ The battery connection, which is not connected to the vehicle body, must be connected
first (+) red. The other connection must be made to the vehicle body (–) black, away
from battery and fuel lines. Only then connect the battery charger to the mains supply.
◾ After charging, disconnect the battery charger from supply mains. Then remove the
chassis connection and the battery connection, in this order, the conductor to be
connected to the positive pole shall be colored red and that to be connected to the
negative pole shall be colored black.
WARNING
I
The AC power plug must not expose to the water, and have to avoid the water flows
towards the supply mains to protect the users from electric shock.
WARNING
I
Explosion hazard and fire hazard!
Explosive gases.
◾ Prevent flames or sparks.
◾ Provide adequate ventilation during charging.
Battery
Used for 12 V 1.2 Ah - 120Ah LiFePO4 and Lead-Acid type (WET, EFB, GEL, AGM, open
and VRLA), or 6 V 1.2 Ah - 14 Ah Lead-Acid type (WET, EFB, GEL, AGM, open and
VRLA) rechargeable battery.
WARNING
I
Do not attempt to charge a non-rechargeable battery!
Keep children and others away from charger.
14
EN