Lint Removal; Caring For Your Dryer - Kitchenaid Keye800S Use & Care Manual

LINT REMOVAL
Lint can gather inside the dryer
and create a fire hazard.
This lint
shouid be removed every 2 to 3
years, or more often, depending
on dryer usage.
WARNING:
• Avoid electrical shock hazard.
Unplug the power supply cord
or turn off the electrical power.
• Avoid injury or damage. Do not
put hands inside the cabinet.
•
Make sure the dryer Is cool.
Cieaning should be done by a
qualified person.
1.
Remove back panel (electric)
or lower access panel (gas).
2
.
Avoid damaging wires, ther¬
mostats, funnel or igniter.
3.
Remove lint from shaded area
with a soft brush or vacuum
Cleaner.
4.
Replace panel, reconnect and
re-level dryer.
10
CARING FOR
YOUR DRYER
The Console Light
The fluorescent console light is
under the console top. The
Console
Light
switch is on the bottom right
side of the console. To turn on the
light, push in the switch and hold it
for a second or two. Push the switch
again to turn the light off.
Repiacing the Consoie Light
WARNING: To avoid possible
shock hazard, unplug dryer
power cord or turn off electrical
power at the main power supply.
1. Flip up the console top by grasp¬
ing it with both hands near each
end and lifting the front edge up.
2.
Remove lamp socket safety cover
at both ends of fluorescent tube.
3.
Grasp fluorescent tube at both
ends. Turn tube away from you
until both ends come out of the
receptacles. Replace with a 15-
watt cool-white (#F15T8) fluores¬
cent tube. Close the console top.
4.
Replace lamp socket safety covers.
5.
Plug in the dryer power cord or
turn the electrical power back on
at the main power supply.