Table of Contents
Advertisement
Quick Links
https://wiki.teltonika-networks.com/view/RUTX08_Device_Recovery_Options
RUTX08 Device Recovery Options
Main Page
>
RUTX Routers
Contents
1 Summary
2 Default login information
2.1 Devices with random password
Summary
This chapter is an overview on various recovery options for a RUTX08 device.
Default login information
Using recovery methods resets the device's configuration to its default state. Therefore, you will
need to use the default authentication info in order to login to the device. The default login
information for RUTX08 is provided below:
Default Address (LAN IP): 192.168.1.1
Default Username: admin
Default Password: admin01 or random generated password*
Devices with random password
* Certain devices or batches of a device may have a generated password out of the box, instead of
admin01. For RUTX08 devices, batch from when unique passwords are used is 27
You can find the batch of your device on the
Factory reset
A factory reset returns the device back to its default factory settings, i.e., it deletes all custom
configurations. Below you will find various methods of performing a factory reset on RUTX08.
>
RUTX08
>
RUTX08 Manual
> RUTX08 Device Recovery Options
Product Labels
sticker.
Advertisement
Table of Contents
Related Manuals for Teltonika RUTX08
Summary of Contents for Teltonika RUTX08
- Page 1 You can find the batch of your device on the Product Labels sticker. Factory reset A factory reset returns the device back to its default factory settings, i.e., it deletes all custom configurations. Below you will find various methods of performing a factory reset on RUTX08.
- Page 2 If you agreed to perform a factory reset, next type in reboot and press "Enter". The router will be reset to it's factory settings and rebooted. The entire sequence of events should look like this: root@Teltonika-RUTX08:~# firstboot This will erase all settings and remove any installed packages. Are you sure?
- Page 3 Bootloader menu The bootloader menu is a special router state used as a recovery tool in case the router becomes inaccessible even after a factory reset. It can be used to upgrade the router's firmware or bootloader version. In order to place the router into the bootloader menu state, follow these steps: Unplug all cables from the router.
Need help?
Do you have a question about the RUTX08 and is the answer not in the manual?
Questions and answers