Recording A Greeting - Sony IT-A100 Operating Instructions Manual

stereo] collate MMe la-t-a dials!
You can record your own
greeting. If you want to use the
pre-recorded greetings, skip
this section.
Your own greeting will be used
for both the standard and ANN
ONLY modes. The pre-
recorded greetings cannot be
used unless you erase your
own recorded greeting.
s
If more than 15 seconds elapse
between pressing buttons (except
when recording), the operation
canceled and you must start over
again.
On {T-A100: The RECORDING
indicator flashes.
On IT-A200: The message
counter shows "19" flashing.
On IT-A100: When the amount of
remaining time becomes 3
seconds, the RECORDING
indicator flashes faster.
On IT-A200: The message
counter counts down from "19"
to "0".
If the 19-second message limit is
exceeded, recording automati-
cally ends.
The user-recorded greeting is
used for both the standard and
ANN ONLY modes. If you turn
the ANN ONLY mode on, no
messages will be recorded even if
your greeting says "Leave a
message."
AUDIBLE IND/ANN
ONLY switch
SET/REC button
GREETING button
Microphone
1
Press SET/REC.
2
Press GREETING.
You hear the recorded instructions, "You may record your
outgoing message. Start after the tone."
3
After you hear a tone, start speaking about 30 cm
(12 inches) away from the microphone.
The greeting must be between 2 and 19 seconds.
4
Press GREETING.
The phone automatically replays the greeting you recorded
and you hear a confirmation beep.
The answering function is turned on.
Set AUDIBLE IND/ANN ONLY to the desired
position.
To turn the ANN ONLY mode on, set it to ANN ONLY
ON.
To turn the standard mode on, set it to ANN ONLY OFF or
AUDIBLE IND ON.
Using as a telephone answering machine | 1