Unpack Your Product - Fisher & Paykel WB24SMB1-SET Installation Manual

UNPACK YOUR PRODUCT

Remove the warming drawer and accessories box from the packaging. Recycle the materials
that can be reused. Dispose packaging materials in accordance with local regulations on
waste disposal.
Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it
has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.
6
All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and
supported service technician.
Supply
Service
Maximum Power
Power outlet*
Power cord (total length)
* The power outlet must be earthed and located within 35 7/16" (900mm) of the centre rear of the product.
RECYCLE
RESPONSIBLY
ELECTRICAL SPECIFICATIONS
WB24SMB1-SET
WB24SDB1-SET
120 VAC, 60 Hz
10 amp circuit
930 W
3-prong grounding-type
70 7/8" (1800mm)
WB30SDB1-SET
WB30SDX1-SET
120 VAC, 60 Hz
10 amp circuit
930 W
3-prong grounding-type
70 7/8" (1800mm)