Table of Contents
Advertisement
Installing.the.GPS.Device.in.Your.Vehicle.
Windshield Mounting
When you install the device for the first time, attach the
device.to.the.support.arm.before.attaching.the.arm.to.your.
vehicle.windshield.
Note:.Before.attaching.the.suction.cup,.clean.the.inside.
of.your.windshield.with.a.standard.window.cleaner.and.a.
lint-free.cloth..
Step 2
Step 1
Extend.the.GPS.antenna.and.insert.the.hooks.on.the.
1.
support.arm.into.the.holes.on.the.bottom.of.the.Device.
Squeeze.the.locking.tabs.together..Swing.the.top.of.the.
2.
support.arm.into.the.back.of.the.device..Release.the.
locking.tabs..
Place the suction cup flat against the windshield, and
3.
adjust.the.position.so.you.can.easily.see.the.display.screen.
but.your.driving.view.is.not.obstructed..Flex.the.goose-
neck.support.arm.until.the.display.is.in.the.right.position.
TM
Press.the.suction.cup.
4.
firmly against the
windshield.and.push.
the.suction.lock.up.
towards.the.suction.
cup..To.release.the.
suction.cup,.pull.the.
lock.back.towards.the.
support.arm.and.lift.the.
plastic.tab..Important:.
be.ready.to.support.the.
device.when.it.releases.
from.the.windshield.
Connect.the.DC.power.cord.to.the.11-15VDC.jack..
5.
Then,.insert.the.cigarrette-lighter.plug.into.a.standard.
1-volt.outlet..The.device.automatically.turns.on.when.
you.connect.the.power.
NOTE:.
Some.states.(including.California.and.Minnesota).
have.banned.the.use.of.windshield-mounted.devices.
inside.the.state's.borders..It.is.your.responsibility.
to.understand.and.comply.with.all.the.laws.of.any.
state(s).in.which.you.operate.your.vehicle.
7
Release Tab
Suction Lock
Advertisement
Table of Contents
