Exodraft SVD Quick Manual

Accessory - Quick Guide
SVD
Product information
Exodraft vibrations dampers are an accessory kit for the Exodraft flange
system that reduces vibrations between the chimney fan and the chimney.
The Exodraft flange system has been developed for steel chimneys to ensure
that the chimney fan is placed on a flat surface.
The Exodraft flanges are available in various standard sizes that fit most steel
chimneys.
Incorrect firing may result in problems with soot, chimney fires, etc. which
might damage the product. Please check out this site for advice about lighting
and maintaining a fire:
www.Exodraft.com
*For more details and informations about size and models,
see www.Exodraft.co.uk/product/accessories/flange/
UK | Read and save these instructions!
How to use this manual
This manual has been prepared based on the specific product and
contains relevant technical information and installations guides.
Accessories and spare parts are not covered by this manual.
Your energy. Optimized.
Please refer to the individual manuals of these components.
This installation manual does not contain any system design documentation.
Failure to observe instructions marked with a danger symbol
may result in personal injury and/or damage to the product.
Warning
Errors and omissions excepted.
To minimise the risk of fire, electric shock, personal injury
and/or damage to the product please observe the following:
• Please read the manual before you start using the product and only use the product in
accordance with the manufacturer's instructions. If in doubt, contact one of our specialized
dealers.
• All installations must be carried out by properly qualified personnel and in accordance
with national legislation and regulations.
• In order to avoid chimney fi res, ensure that the chimney has been swept before mounting
the fan.
• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally
be reconnected.
• Exodraft always recommends the use of a smoke alarm when a solid fuel fireplace is
installed.
Disposal
Electrical and electronic equipment (EEE) often contain materials, components and substances
that may harm the environment or be hazardous to your health. Products (WEEE) marked with
the 'crossed-out wheeled bin' symbol should be disposed of separately from other waste at the
end of its life. Though legislation may differ from country to country we strongly advise that
electrical and electronic waste is separated from other waste and disposed of according to
national legislation to protect the environment and personnel that may come into contact with
waste.
Your energy. Optimized.
3112041_SVD_UK | 070623