Advertisement
5. Intended use
5.1
Type of application
DANGER!
The clamping device may only be used on machines for processing wood, wood based
materials or materials with comparable cutting properties.
Please pay attention to the specifications of the machine manufacturer concerning the
applicability of the clamping device.
The machine-specific maximum permitted tool weight is not allowed to be exceeded.
5.2
RPM n / n max.
Danger!
Exceeding the permissible operating RPM can result in serious personal injury and
material damage!
The maximum operating speed „n max." indicated on the chuck must not be exceeded!
If several tools are mounted on a shaft or a milling arbor, the smallest value „n min." is
regarded as the maximum permissible operating RPM.
5.3
Direction rotation
DANGER!
If the direction of rotation is specified on the clamping device, the direction of rotation of
the tool and of the clamping device has to be the same.
6. Safe Handling
WARNING!
Use appropriate safety gear - Refer to chapter 3.
Health risk!
6.1
Transport
NOTE!
Transport only with suitable packaging!
6.2
Assembly of the clamping device
WARNING!
Risk of injury caused by sharp cutting edges!
12
06/2022 ID.525127 V1.0
Advertisement
