Extension Is Permitted Use Certain Co Line Only - PABX TC-2000 A Instruction Manual

Chapter 2: Programming and Operating
Following 2.11.5 ~ 2.11.7 are only effective for model TC-2000H.
2.11.5 Class Assignment for Certain Extension
Format 1: * 5 8 ABC M #
ABC = Extension number
M=0= No restriction.
M=1 ~4=Not allowed call numbers with front digits in groups 1 to 4.(refer 2.11.7)
M=5~ 6=Only permit call numbers with front digits in groups 5 to 6.(refer 2.11.7)
M=7=Only permit internal calls.
2.11.6 Class Assignment for All Extensions
Format : * 58 M #
M is the same as 2.11.5
Example : Assign extension 804 to class 2 ( M=2), others to class 3(M=3).
Operating: Input * 58 3#
2.11.7 Front Digits of Phone Number Management
Format 1: * 5M ABCD #
Format 2: * 5 M # ( Clear front digits of certain group)
M=1 ~4= Numbers with front digits in these groups are forbidden.
M=5~ 6=Only call numbers with permitted front digits in these groups.
M=7=Only for internal communication.
Example: Assign front digits 0757 / 010 to group 1, and extension 803 is not
Operating: Input * 5 1 0757 #

2.11.8 Extension is Permitted Use Certain CO Line Only

Format : * 42 M ABC #
MN = CO line jack number
ABC = Extension number
Description: The assigned extension is permitted use only designated CO line
Example: Input * 42 4 803 # can assign extension 803 is permitted use only
CO line 4.
1. Any incoming call can be transferred to this assigned extension, and
2. This extension can have only one CO line to make external call.
*58 804 2 #.
We can use * 58 3# do assignment for the most extensions first.
ABCD = Front digits of phone number
allowed to call numbers with front digits 0757 / 010.
Each group can have up to ten pieces front digits and maximum of
four digits for each piece.
to make external call.
this extension user can pick up any incoming call.
- 9 -
010# *58 803 1 #.