Related Manuals for Pulsar MS 2012
Summary of Contents for Pulsar MS 2012
- Page 1 MS 2012 v.1.0 MS 13,8V/2A Buffer, switch mode power supply module. EN** Edition: 1 from 18.09.2014 Supersedes the edition: ------------...
- Page 2 MS2012 Features: DC 13,8V/2A uninterruptible power supply LED indication high efficiency 83% protections: low voltage ripple SCP short-circuit protection battery charging and maintenance control OLP overload protection battery output full protection against short-circuit ...
- Page 3 MS2012 1.3. Description of components and connectors PSU module. Table 1. Elements of the PSU module pcb (fig. 2). Element no. Description potentiometer, DC adjustment fuse in the battery circuit Connectors: +BAT- DC supply output of the battery +AUX- DC supply output (+AUX= +U, -AUX=GND) LEDs –...
- Page 4 MS2012 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operating parameters (tab.5) Electrical parameters (tab. 3). Mains supply 20V÷22V AC 50VA min. (e.g. AWT5161820, AWT037) Current up to 2,5A max. Power frequency 50Hz Power 34 W Efficiency 11V÷...
- Page 5 MS2012 1. Output current 2A + 0,2A battery charge 2. Output current 1,7A + 0,5A battery charge Total device current + battery: 2,2A max. As the PSU module is designed for a continuous operation and is not equipped with a power-switch, therefore an appropriate overload protection shall be guaranteed in the power supply circuit.
- Page 6 THE GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a five-years warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such...
Need help?
Do you have a question about the MS 2012 and is the answer not in the manual?
Questions and answers