LEGRAND C2G31012 Manual page 17

HDMI® HDBaseT + VGA, 3.5mm, and USB-B to A over Cat Extender Wall Plate
Transmitter to Box Receiver - 4K 60Hz
API Command Set Continued
No. Description
Command:
RESET AUTOCEC_D
<CR><LF>
Return:
AUTOCEC_D RESET prm
<CR><LF>
Parameter:
Reset CEC
prm = {1,2,3...,30}// accord-
16 POWER
ing to the actual time coun-
Delay Time
ter,1 means1 minute ,2
means 2 minutes，Default
wait time is 2 minutes, Max
wait time is 30 minutes.
Description:
AUTOCEC_D is short for
CEC auto Power Delay
Timing
Command Example
Command:
RESET AU-
TOCEC_D
<CR><LF>
Return:
AUTOCEC_D
RESET 3
<CR><LF>
Description:
When no active
signal to output, 3
minutes later, the
unit will auto
power off.
No. Description
Command:
SET AUTOCEC_M prm
<CR><LF>
Return:
AUTOCEC_M prm <CR><LF>
Set Auto
17
Parameter:
CEC mode
prm = {on,off}//set the auto cec
mode，on/off
Description:
AUTOCEC_M is short for CEC
auto mode; default value is on.
Command:
GET AUTOCEC_M
<CR><LF>
Return:
AUTOCEC_M prm <CR><LF>
Get Auto
Parameter:
18
CEC on/off
prm = {on,off}//get the auto
cec mode, on/off;
Description:
AUTOCEC_M is short for
CEC auto mode, default value
is on.
15
Command Example
Command:
SET AUTOCEC_M
off <CR><LF>
Return:
AUTOCEC_M off
<CR><LF>
Description:
Set the auto CEC
mode off.
Command:
GET AUTOCEC_M
<CR><LF>
Return:
AUTOCEC_M off
<CR><LF>
Description:
The auto CEC
mode is off.
(us)