Matatakitoyo Torque Tools MTD Operation Manual

Adjustable Torque Screwdriver
OPERATION MANUAL
1/4"
TORQUE
BEFORE STARTING
1. Study this instruction before use.
2. This torque wrench is calibrated and tested before leaving the factory, it is certified to meet the current standard
specification and has an accuracy of C.W.±6%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTENERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Do not over torquing the fastener, or it will cause tool's damage and serious injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result in the loss of accuracy and invalidating the warranty.
7. Do not continuously apply force after hearing the clicking sound or feel shock.
8. Do not use any kind of extension on the handle of the tool. This will not only damage the tool, also affect the accuracy.
9. Use special care at minimum torque setting.
10. Please wear gloves and goggles when working.
WARNING
CONTENTS
Torque screwdriver
Socket
HOW TO SET TORQUE VALUE
Pull to unlock and turn it to set the target torque.
Then push it back to lock.
1 2
Unlock
Driver 1/4"
Supplied in a plastic box.
3
Turn
Body Knob
Main Scale
For example, ITEM NO. MTD-1405N target torque is 3 Nm.
Red line of main scale reach 3 Nm (see A) , so as to
acquire 3 Nm.
A
Lock
Models covered
MTD
MTD-1405N / MTD-1450I
MTD-1408N / MTD-1480I
MTD-1405NL / MTD-1450IL
MTD-1408NL / MTD-1480IL
Manual