Storage After Use; Emptying The Dust Container; Cleaning The Housing; Cleaning Or Replacing The Filter - Umuzi Cleaning UZ-CL-VCS01 User Manual

Storage after use

The device is supplied with a wall mount (12).
The wall mount can be fixed to the wall by means of 2 screws.
Once the wall mount is attached to the wall, you can store the device and its 2 accessories onto the wall
mount.
Emptying the dust container
Removing the waste from the dust container.
• Remove the power plug (8) from the electrical outlet.
• Remove the telescopic tube (15) from the device.
• Hold the device above a waste bin.
• Press (A) the dust container bottom release button (11) to open the bottom flap (B) of the dust container.
• When the bottom flap of the container opens (C), all waste residues drop in the bin.
• If required, use your hand to remove waste or materials stuck in the dust container.
• Once the container is empty and all residues have been removed, close the bottom flap until you hear a
'click' .
A
4) CLEANING AND MAINTENANCE
Before cleaning the device, make sure it is switched OFF and disconnected from the mains electricity
supply and allow it to cool down fully.

Cleaning the housing

• Remove the power plug (8) from the electrical outlet.
• Never use aggressive or abrasive cleaning materials or sharp objects like hard brushes or knives.
• Clean the exterior of the casing, the accessories and the power cord with a damp cloth.
• Then dry the exterior with a dry cloth.
Cleaning or replacing the filter
For the best vacuum results, clean or replace the filter after every 2nd or 3rd use of the device, or more
frequently if the filter is visibly blocked.
• Remove the power plug (8) from the electrical outlet.
B
EN-7
C