Page 1
TNS5800D-8P4GT-P24 (8 100M PoE M12 + 4 Model V front view Gigabit M12, 24VDC). Model II. TNS5800D-8P4GT-P110 (8 100M PoE M12 + 4 Gigabit M12, 110VDC). TNS5800D 12-Port Series Model III. TNS5800D-8T4GT-P24 (8 100M M12 + 4 Gigabit Layer 3 Wall Mounting M12, 24VDC).
Don't place or install the device in area near water or Supports anti-reverse connection and redundant moist, keep the relative humidity of the device power input. The power supply interface adopts surrounding between 5%~95% without condensation. M12 A-Coded 4-Pin pin (male) connector. The pin Before power on, first confirm the supported power definitions are shown in the left figure.
Page 3
This device provides Pin No. Pin Definition Description The device is powering on or the 10/100Base-T(X) interfaces, device is abnormal. GE0- Negative bi-directional the interface type is M12 D- The device is powered off or the data of Gigabit Ethernet Coded 4-Pin slot (female).
1 and 3 are positive, 2 and 4 are Model II, Model M12(Male), 4-Pin A-Coded negative Model 110VDC(66~156VDC), Model VI Support reverse connection protection 100M M12 10/100Base-T(X), M12(Female), 4- Pin D-Coded, Automatic Flow Power Consumption Control, Full/half Duplex Mode, Model II Full-load(Without PoE): MDI/MDI-X Autotunning 15.8W@110VDC...
Page 5
Professional users should contact their suppliers and check the terms of their selling agreement. This product must not be disposed of with other commercial waste. Users’ cooperation in the correct disposal of this product will contribute to saving valuable resources and protecting the environment.
Need help?
Do you have a question about the TNS5800D and is the answer not in the manual?
Questions and answers