Zenoah EBZ7500 Operator's Manual page 7

EBZ7500/ EBZ7500RH
5. For safe operation
The temperature of the machine
may increase after stopping the
engine. Especially never forget
to cool down the engine before
refueling the machine.
10. In an emergency, pull up the
11. After using blowers and other
equipment, CLEAN UP! Dis-
pose of debris in trash recepta-
cles.
MAINTENANCE
1. In order to maintain your prod-
uct in proper working order, per-
form
checking operations described
in the manual at regular inter-
vals.
2. Always be sure to turn off the
engine
spark plug before performing
any maintenance or checking
procedures.
The metallic parts and engine
cover reach high temperatures
immediately after stopping the
engine.
3. Examine the blower at intervals
for loose fasteners and rusted
or damaged parts. Use special
care around the fuel line, the
muffler, and the ignition wiring.
4. All engine service except for
those described in this manual
should be performed by compe-
tent service personnel. Improper
service to the blower fan and
muffler could cause a hazardous
failure.
5. When replacing the any other
part, or any lubricant, always be
sure to use only ZENOAH prod-
ucts or products which have
been certified by ZENOAH for
use with the ZENOAH product.
WARNING
lower portion of both strap
buckles to loosen the straps.
Let the machine fall backwards
and release yourself from the
machine.
the maintenance
and disconnect the
WARNING
5. For safe operation
and
7
6. In the event that any part must
be replaced or any mainte-
nance or repair work not de-
scribed in this manual must be
performed, please contact a
representative from the store
nearest ZENOAH
servicing dealer for assistance.
7. Do not use any accessory or at-
tachment other than those bear-
ing the ZENOAH mark and rec-
ommended for the unit.
8. Under no circumstances should
you ever take apart the product
or alter it in any way. Doing so
might result in the product be-
coming damaged during opera-
tion or the product becoming
unable to operate properly.
TRANSPORTATION
• Drain the fuel from the fuel tank
before transporting or storing
the blower.
• Secure the unit carefully to pre-
vent movement when it is trans-
ported.
• A unit that receives a strong
shock during transport and un-
loading may malfunction.
STORAGE
• When storing the blower, choose
a space indoors free from mois-
ture and out of the reach of chil-
dren.
DISPOSAL
• When you dispose of the ma-
chine, do not disassemble the
machine.
• When disposing your machine,
fuel or oil for the machine, be
sure to allow your local regula-
tions.
authorized