Page 1
Assembly and Operating Manual SDV-P / SDV-P-E / SDV-P-E-P Pressure maintenance valve Translation of the original manual...
Page 2
Your SCHUNK team Customer Management Tel. +49-7133-103-2500 Fax +49-7133-103-2239 cms@de.schunk.com Please read the operating manual in full and keep it close to the product. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
10 UKCA declaration of incorporation ............20 11 Information on the RoHS Directive, REACH Regulation and Substances of Very High Concern (SVHC) ..................21 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Non-observance can lead to irreversible injury and even death. CAUTION Dangers for persons! Non-observance can cause minor injuries. CAUTION Material damage! Information about avoiding material damage. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
} 2.3 [/ 6] 1.3 Scope of delivery The scope of delivery includes Pressure maintenance valve SDV-P / SDV-P-E / SDV-P-E-P in the version ordered 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Make sure that the environment is free from splash water and vapors as well as from abrasion or processing dust. Exceptions are products that are designed especially for contaminated environments. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Do not expose the product to any corrosive media. This does not apply to products that are designed for special environments. Eliminate any malfunction immediately. Observe the care and maintenance instructions. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Only qualified personnel may disassemble the product. Perform maintenance, modifications, and additions outside the danger zone. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
* at a defined reference volume and constant temperature [20° C] More technical data is included in the catalog data sheet. Whichever is the latest version. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
At a pressure failure of the supply line, the check valves close and prevent a pressure drop. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
SDV-P SDV-P-E Mounting optional: M5 screw into thread M4 screw for screwing through thread. 2 screws are sufficient for mounting SDV-P-E-P Size 23.5 22.5 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Page 12
The centering sleeves are included in the respective accessory kit (SDV-P / Gripper). WARNING Risk of injury during connection! Switch off the energy supply. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Connections SDV-P SDV-P-E Output Input Size Thread diameter of the air connections G 1/8" G 1/4" G 3/8" 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Page 14
P1 / P2 Main connections (Hose G 1/8" G 1/8" connection) p1 /p2 Hose-free direct connection at the base a / b Hose-free direct connection Gripper Connection diagram SDV-P 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Press button (1) to ventilate connection A, a. Press button (2) to ventilate connection B, b. ð The sealed compressed air escapes while the button is being pressed. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Troubleshooting 7 Troubleshooting Possible cause Corrective action Performance loss (pressure loss): Check seal tightness of the vent Check line pressure 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
If there is leakage or a defect of the mechanical part, sent the valve with a repair order to SCHUNK. Repair work may only be carried out by SCHUNK. 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Person authorized to compile the technical documentation: Stefanie Walter, Address: see manufacturer's address Lauffen/Neckar, August 2023 Dr.-Ing. Manuel Baumeister, Head of Systems Engineering, Technology & Innovation 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Person authorized to compile the technical documentation: Marcel Machado, address: refer to manufacturer's address Lauffen/Neckar, August 2023 Dr.-Ing. Manuel Baumeister, Head of Systems Engineering, Technology & Innovation 07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
"on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)", or fulfill their intended function only as part of one. Therefore products from SCHUNK do not fall within the scope of the directive at this time. REACH Regulation Products from SCHUNK fully comply with the regulations of Regulation (EC) No. 1907/2006...
Page 22
07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Page 23
07.00 | SDV-P / SDV-P-E / SDV-P-E-P | Assembly and Operating Manual | en | 389561...
Page 24
SCHUNK SE & Co. KG Toolholding and workholding | Gripping technology | Automation technology Bahnhofstr. 106 – 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 Fax +49-7133-103-2399 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the SDV-P and is the answer not in the manual?
Questions and answers