Make sure all parts are available before assembly. If any part is missing, We are so excited to be part of your journey with your please contact local retailer. No tools are required for assembly. little one. While traveling with the Joie Tourist™ Signa- 1 Stroller Frame 12 Buckle...
Page 9
Be sure the stroller is fully open or folded before allowing WARNING child near the pram/stroller. ! FOLLOW THE MANUFACTURER’S INSTRUCTIONS. Child may slip into leg openings and be strangled if the har- ness is not used. ! PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER.
Stroller Assembly The parking device shall be engaged when placing and re- moving children. (Please refer to figures on page 1-9) For infant child restraints used in conjunction with a chassis, this vehicle does not replace a cot or a bed. Should your Please read all the instructions in this manual before child need to sleep, then it should be placed in a suitable assembling and using this product.
Stroller Operation through the shoulder harness slot from back to front. Rethread it through the slot that is closest to child's shoulder height. Use Buckle Use slide adjuster to change the harness length. see images Press the button 2, while pulling the waist harness to Release Buckle proper length.
Use Front Swivel Lock Use Tether Strap see images see images Push up the front swivel locks to maintain the moving Use the tether strap to prevent the stroller inadvertently rolling direction. away. Check that when your hand is through the loop, it allows you to easily control the stroller.
Page 13
Care and Maintenance Use Rain Cover see images see images To assemble the rain cover, place it over the stroller, and then Removable seat pad may be washed in cold water and drip- attach the seaps and hook and loop fasteners on the rain cover. dried.
Page 14
Nuna Baby Australia Pty Ltd. Unit 1, 35 Lyn Parade Prestons, NSW Australia 2170 view all fine signature selections at joiebaby.com/signature IM-000736F...
Need help?
Do you have a question about the tourist and is the answer not in the manual?
Questions and answers