Dig. camcorder
The most practical connection for a camcorder is at the side of the TV.
Otherwise, use an HDMI cable or the component video and audio cable (YPbPr and Audio L/R) to
connect the camcorder to the back of the TV.
Channel decoder
NonPu blish
Before using a SCART digital channel
decoder, select the channel to decode and
assign the decoder to the SCART connector.
1. Press
.
EN
58
2. Select [Setup] > [Channel settings] >
[Decoder] > [Channel].
3. Set the channel you want to decode.
4. Select [Status], then the location of the
decoder.
5. Press OK.