Other Connectors
SYSFAN1: System Fan Box Header
The fan power connector supports system cooling fans with +12V. When connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
If the motherboard has a System Hardware Monitor chipset onboard, you must use a
specially designed fan with speed sensor to take advantage of the fan control.
⚠
Important
Please refer to the recommended CPU fans at processor's official website or consult
the vendors for proper CPU cooling fan.
JKBMS1: PS/2® Keyboard & Mouse Box Header
This connector is used to connect PS/2® keyboard and
28
Connectors
1
SYSFAN1
4
6
JKBMS1
1
JKBMS1
1
5V
3
GND
mouse.
1
KBDAT
3
MSDAT
5
+5V
SYSFAN1
2
GND
4
12V
2
GND
4
KBCLK
6
MSCLK