Sinoboom 1018RE Operation Manual

Hide thumbs Also See for 1018RE:

Maintenance manual (102 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

Part No.515003100002

Rev: A

Mar. 2021

Operation

Manual

产品说明书

PRODU

C T MAN U AL

1018RE/3369RE

1218RE/4069RE

0608E (2132E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the 1018RE and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom 1018RE

Page 1 Operation Part No.515003100002 Rev: A Manual Mar. 2021 产品说明书 PRODU C T MAN U AL 1018RE/3369RE 1218RE/4069RE 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 5 Decals/Nameplate Inspection for details.) Trade Identification Models Serial Numbers Imperial Metric 1500200100 to present 1018RE 1018RE 3369RE 1500300100 to present 1218RE 1218RE 4069RE NOTE: • Product model is applied in product nameplate for distinction of products of different main parameters.
Page 6 This Page Intentionally Left Blank...
Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
Page 8 This Page Intentionally Left Blank...
Page 9: Table Of Contents
Testing the Ground Controller (- Sinoboom Control System) ... 6-3 Safety Definitions ..... 3-1 Preparation .
Page 10 Decals/Nameplates（ANSI） . . . 10-17 Decals/Nameplates（KCS） ..10-20 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-5 Appendix 3: Repair & Inspection Report ......A-7 © Mar. 2021 1018RE&1218RE Operation Manual...
Page 11: Introduction
The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 13: Machine Specifications
MACHINE SPECIFICATIONS Table 1-1 1018RE specifications 1018RE (METRIC) 3369RE (IMPERIAL) MEASURE DIMENSION Max platform height 10 m 32ft 9.7in Max working height 12 m 39ft 4.4in Max horizontal reach 1.5 m 4ft 11.1in Overall length (stowed, with/without 3.8 m/3.19 m 12ft 5.6in/10ft 5.6in...
Page 14 MACHINE SPECIFICATIONS Table 1-1 1018RE specifications (continued) 1018RE (METRIC) 3369RE (IMPERIAL) MEASURE Turning radius (inside) 2.11 m 6ft 11in Turning radius (outside) 4.6 m 15ft 1in Max allowable side force (indoor/ 400 N 90 lbf outdoor) Max operating noise 82 dB POWER Drive mode (drive×steer)
Page 15 MACHINE SPECIFICATIONS Table 1-1 1018RE specifications (continued) 1018RE (METRIC) 3369RE (IMPERIAL) MEASURE WEIGHT Gross weight (with/without 4510kg/4050kg 9943 lb/8929 lb outriggers) Table 1-2 1218RE specifications 1218RE (METRIC) 4069RE (IMPERIAL) MEASURE DIMENSION Max platform height 12.2 m 40ft 0.3in Max working height 14.2 m...
Page 16 Max allowable wind speed (indoor/ 0m/s (indoor)/12.5m/s (outdoor) 0 mph (indoor)/28 mph (outdoor) outdoor) Max allowable altitude 1000m 3280.8ft Allowable ambient temperature -10℃～40℃ 14℉～104℉ (lead-acid batteries) Allowable ambient temperature (- -20℃～40℃ -4℉～104℉ lithium batteries) Max allowable RH © Mar. 2021 1018RE&1218RE Operation Manual...
Page 17 The ground bearing data is approximate, not considering different options and only applicable when it is safe enough. e) The loads of persons, accessories, tools and materials are factored into the rated platform capacity. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 20 The machine comes in operating/raised position when the platform is raised until the down limit switch disengages. Platform heights at which the down limit switch disengages (height from ground to platform floor)： 1018RE：2.7～3.3m（8.6ft～10.8ft） 1218RE：2.7～3.3m（8.6ft～10.8ft） Stowed position： The machine comes in stowed position when fully retracted. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 21: Safety
Failure to notify the manufacturer within SAFETY DEFINITIONS 48 hours of the incident involving the machine of Hunan Sinoboom Intelligent Equipment Co., Ltd. may void the product's warranty. This safety alert symbol appears with most safety statements. It means atten-...
Page 22: Electrocution Hazards
Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Mar. 2021 1018RE&1218RE Operation Manual...
Page 23 • Do not replace key parts that affect machine stability with different weights or specifications. • Do not modify or change moving aerial platforms without the manufacturer’s prior written permission. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 24: Jobsite Hazards
Do not lift Sinoboom, it must be approved or guided by the the platform when the wind speed manufacturer. exceeds 12.5 m/s (28 mph). If the...
Page 25: Unsafe Operation Hazards
If you intend to lower the platform with a ground controller, you must operate it 1018RE&1218RE Operation Manual © Mar. 2021...
Page 26: Fall Hazards
COLLISION HAZARDS At a minimum, operators must operate and maintain the machine as stated in the Operation Manual and in the Maintenance Manual in addition to following more strin- gent industry regulations and workplace rules. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 27: Crush Hazards
• Maintain good judgment and plan- ning when using the controller on the ground to operate the ma- chine. Maintain proper distance between operator, machine and fixed object. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 28: Explosion And Fire Hazards
During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 29: Battery Hazards
Remove all rings, watches and other accessories. CHEMICAL BURN HAZARD Avoid spilling or contacting battery acid with unprotected skin. Seek medical attention immediately if battery acid contacts skin. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 30: Hydraulic Systems Hazard
WELDING AND POLISHING REQUIREMENTS Before welding, grinding and polishing operations, al- ways ensure you read and understand all operation and maintenance requirements in the Operation Manual and the Maintenance Manual. © Mar. 2021 3-10 1018RE&1218RE Operation Manual...
Page 31: After Using The Machine
5. Block the wheels with the wheel wedges. 6. Charge the battery. NOTICE After using the machine, the power off switch must be disconnected. 1018RE&1218RE Operation Manual 3-11 © Mar. 2021...
Page 33: Jobsite Inspection
Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
Page 35: Pre-Operation Inspection
• Only qualified maintenance technicians can repair this machine. the machine according to the manufacturer's regulations. After any maintenance, the operator 1018RE&1218RE Operation Manual © Mar. 2021...
Page 36: Conducting A Pre-Operation
Performing daily inspection of the • Scissor arm pins and fasteners hydraulic oil level will help you determine if a problem • Platform joystick exists in the hydraulic system. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 37: Inspecting The Battery
-30°C (-22°F) need to be identified. NOTE: Ensure the battery is fully charged before testing. NOTICE Different hydraulic oils can be added according to customer requirements upon factory delivery, but cannot be mixed. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 39: Pre-Operation Function Test
• Check the work site. NOTICE • Check the safety decals/ name- plate on the machine. All tests on the ground controller should be completed in one cycle. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 40: Preparation
OFF position NOTICE after being released. In cold weather, the LCD screen needs warming up before it properly displays anything. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 41: Ground/Platform Select Switch
All tests on the ground controller shall be completed within one cycle. PLATFORM UP/DOWN FUNCTION The alarm sounds 60 times/minute while the platform is lowering, and 180 times/minute while the machine is tilt. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 42: Preparation
PRE-OPERATION FUNCTION TEST POWER CAUTION Figure 6-2 Ground controller (Sinoboom control system) Table 6-2 7. Neutral position 13. Platform up switch 1. Hour meter 2. Emergency stop button 8. Natural gas switch (not used) 14. Platform up/down enable switch 9. Engine speed select switch (not 15.
Page 43: Ground/Platform Select Switch
2. Pull out the emergency stop button on ground controller to ON position, and press the engine start switch, the engine will be normally started. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 44 9. Drive switch 10. Drive speed select switch 4. Horn button 16. LCD screen 5. Engine speed select switch (not 11. Enable switch used) 12. Drive/lift proportional control 6. Generator switch (if equipped) joystick © Mar. 2021 1018RE&1218RE Operation Manual...
Page 45: Preparation
3. With the emergency stop button on ground controller in OFF position and the one on platform controller in ON position, press the engine start switch, the engine should not get started and all functions should be inoperative. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 46: Drive Function
Press the drive speed select switch, the switch should be lit and the low drive speed should be selected; press the switch again, the switch light should go out and the high drive speed should be selected. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 47 PRE-OPERATION FUNCTION TEST AUTO AUTO AUTO POWER Figure 6-4 Platform controller (Sinoboom control system) Table 6-4 1. Individual outrigger level switch 7. Emergency stop button 13. LED screen 2. Outrigger self-level switch 8. Enable switch 14. Drive & steer enable switch 3.
Page 48: Preparation
3. With the emergency stop button on ground controller in OFF position and the one on platform controller in ON position, press the engine start switch, the engine should not get started and all functions should be inoperative. © Mar. 2021 6-10 1018RE&1218RE Operation Manual...
Page 49: Drive Switch
5. Release the joystick, the machine should come to an immediate stop. Note: The drive speed is in direct proportion to the stroke of the joystick. 1018RE&1218RE Operation Manual 6-11 © Mar. 2021...
Page 50: Outrigger Leveling
3. Switch from drive to platform lift function, and raise the platform until the lower limit switch disengages, 5. Pull out the emergency lowering handle (located on the red indicator light on the level sensor will the right side of chassis) © Mar. 2021 6-12 1018RE&1218RE Operation Manual...
Page 51: Testing The Drive Speed
4. Drive the machine to allow the right steer wheel 5. Press the drive high/low speed switch on platform to stand on a 10cm (3.9in) high block or kerb. controller to select the high drive speed. 1018RE&1218RE Operation Manual 6-13 © Mar. 2021...
Page 52: Testing The Weighing System
15°(59°F), the overload alarm may be triggered (the display screen on platform or ground controller indicates “OL”) even if the platform load does not exceed the rated load, in this circumstance, please re-calibrate the weight sensor. © Mar. 2021 6-14 1018RE&1218RE Operation Manual...
Page 53: Operating The Machine
If more than one operator uses the same ma- the Emergency Lowering Function, page 6-12. chine at different times of the same work shift, they must all be qualified operators and follow all the safety rules and instructions in this Operation Manual. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 54: Operation From Ground
Max slope rating, stowed position： 3. Hold the joystick enable switch and slowly deflect backward the joystick, the platform should lower 1018RE 35%/19° with the alarm sounding. 1218RE 35%/19° To steer: © Mar. 2021 1018RE&1218RE Operation Manual...
Page 55: Extending And Retracting The Platform
3. Lower the platform extension locking handle, and ensure the extension platform is locked. OPERATING THE OUTRIGGERS NOTICE The machine must be running to operate the outriggers. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 57: Transporting And Lifting The Machine
5. Ensure the chains or straps are of ample loading Do not tow the machine unless an emergency, capacity. failure or loss of power occurs. 6. Turn the key switch to the OFF position and remove the key before transporting. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 58: Lifting The Machine With A Crane
1. Fully lower the platform. Keep the platform down during transportation. 2. Ensure the extension platforms, controllers and chassis components are adequately securely in place. 3. Remove all loose items from the machine. 4. Determine the center of gravity of the machine. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 59: Maintenance
• Conduct a quarterly inspection on machines that as stated in operation manual and maintenance have been out of service for a period lasting longer than three months. manual. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 60: Following Amaintenance Schedule
Every half a year or every 500 re-inspected after repair is completed and marked A+B+C hours in the box marked "inspection". Select the appropriate inspection procedure based on the Every year or every 1000 hours A+B+C+D inspection type. © Mar. 2021 1018RE&1218RE Operation Manual...
Page 61 Hydraulic Tank B-5 Replace High- Pressure Filter Element B-6 Inspect the Battery B-7 Inspect Drive Reducer Oil Level B-8 Test Oscillate Outriggers B-9 Test Drive Speed B-10 Test Tilt Protection System B-11 Test Brake Distance 1018RE&1218RE Operation Manual © Mar. 2021...
Page 62 D-1 Replace Drive Reducer Gear Oil D-2 Inspect Scissor Arm Sliders D-3 Replace Hydraulic D-4 Replace Hydraulic Tank Suction Filter D-5 Inspect Scissor Arm Bearing User Inspector Signature Inspector Date Inspector Title Inspector Company © Mar. 2021 1018RE&1218RE Operation Manual...
Page 63: Decals/Nameplates Inspection
Do not operate the engine if there are missing or badly worn safety decals. 1018RE&1218RE Operation Manual 10-1 © Mar. 2021...
Page 64: Decals/Nameplates(Gb)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers © Mar. 2021 10-2 1018RE&1218RE Operation Manual...
Page 65 Decal-Emergency lowering 102004100008 Decal-Transport tiedown 115003103004 Decal-Tipping hazard 101012100001 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102003100009 Decal-Operation requirements（1018RE） 102004100024 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 1018RE&1218RE Operation Manual 10-3 © Mar. 2021...
Page 66 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 101056103002 Decal-Main power disconnect switch 102001103001 Nameplate-GB 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103016 Decal-Emergency stop switch © Mar. 2021 10-4 1018RE&1218RE Operation Manual...
Page 67: Decals/Nameplates(Ce-Imperial)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 32 33 Decals position for models with outriggers Decals position for models with outriggers 1018RE&1218RE Operation Manual 10-5 © Mar. 2021...
Page 68 101012100001 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102003100009 Decal-Operation requirements（1018RE） 102004100024 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 102001103003 Nameplate-CE © Mar. 2021 10-6 1018RE&1218RE Operation Manual...
Page 69 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch 1018RE&1218RE Operation Manual 10-7 © Mar. 2021...
Page 70: Decals/Nameplates(Ce-Metric)
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers 32 33 Decals position for models with outriggers Decals position for models with outriggers © Mar. 2021 10-8 1018RE&1218RE Operation Manual...
Page 71 101012100001 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102003100009 Decal-Operation requirements（1018RE） 102004100024 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 102001103003 Nameplate-CE 1018RE&1218RE Operation Manual 10-9 © Mar. 2021...
Page 72 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch © Mar. 2021 10-10 1018RE&1218RE Operation Manual...
Page 73: Decals/Nameplates（As
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers 1018RE&1218RE Operation Manual 10-11 © Mar. 2021...
Page 74 Decal-Tipping hazard 101012100001 Decal-No smoking or fires 102003100009 Decal-Operation requirements（1018RE） 102004100024 Decal-Operation requirements（1218RE） 101012100007 Decal-Tipping hazard 102004100015 Decal-General safety 102004100040 Decal-Crush hazard 115002103006 Decal-Operation requirements（1018RE） 115003103011 Decal-Operation requirements（1218RE） 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage © Mar. 2021 10-12 1018RE&1218RE Operation Manual...
Page 75 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 101016100031 Decal-Main power disconnect switch 102001103002 Nameplate-AS 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch 1018RE&1218RE Operation Manual 10-13 © Mar. 2021...
Page 76: Decals/Nameplates（Csa
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers © Mar. 2021 10-14 1018RE&1218RE Operation Manual...
Page 77 Decal-Transport tiedown 115003103017 Decal-Tipping hazard 101012100001 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102009103006 Decal-Operation requirements（1018RE） 102010103006 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101040103015 Decal-Annual inspection 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 1018RE&1218RE Operation Manual 10-15 © Mar. 2021...
Page 78 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 101016100031 Decal-Main power disconnect switch 102001103005 Nameplate-CSA 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch © Mar. 2021 10-16 1018RE&1218RE Operation Manual...
Page 79: Decals/Nameplates（Ansi
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers 1018RE&1218RE Operation Manual 10-17 © Mar. 2021...
Page 80 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102009103006 Decal-Operation requirements（1018RE） 102010103006 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101040103015 Decal-Annual inspection 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch © Mar. 2021 10-18 1018RE&1218RE Operation Manual...
Page 81 DECALS/NAMEPLATES INSPECTION 序号部件编号说明数量备注 102001103004 Nameplate-ANSI 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch 1018RE&1218RE Operation Manual 10-19 © Mar. 2021...
Page 82: Decals/Nameplates（Kcs
Decals position for models without outriggers Decals position for models without outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers Decals position for models with outriggers © Mar. 2021 10-20 1018RE&1218RE Operation Manual...
Page 83 101012100001 Decal-No smoking or fires 101012100007 Decal-Tipping hazard 102003100009 Decal-Operation requirements（1018RE） 102004100024 Decal-Operation requirements（1218RE） 101012100019 Decal-Tipping hazard 102004100040 Decal-Crush hazard 101014100026 Decal-Safety arm 101016100030 Decal-Lanyard anchorage 101016100031 Decal-Main power disconnect switch 115003103009 Nameplate-KCS 1018RE&1218RE Operation Manual 10-21 © Mar. 2021...
Page 84 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 101055103015 Decal-Emergency stop switch © Mar. 2021 10-22 1018RE&1218RE Operation Manual...
Page 85: Appendix 1: Symbols And Description
Collision hazards-Re- Electrocution hazards Electrocution hazards Keep a safe distance Tip-over hazards-Avoid lease brake on ramp on platform on the ground and from power lines uneven ground platform 1018RE&1218RE Operation Manual © Mar. 2021...
Page 86 Indoor use handle position and down platform Outdoor use The side force Electrocution hazards Wear protective cloth- Battery explosion ing and glasses hazard No smoking No smoking Only professional Improve point Lashing points maintenance © Mar. 2021 1018RE&1218RE Operation Manual...
Page 87 DECALS/NAMEPLATES INSPECTION personnel can start the maintenance Tire to ground load Forklift fork position Platform carrying Carrying capacity of Hydraulic oil filler capacity fixed and extended platform Horn Tool or weight Fast/high speed Slow/low speed 1018RE&1218RE Operation Manual © Mar. 2021...
Page 89: Appendix 2: Prepare The Work Record Before Delivery
2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re-in- spected after repair is completed and marked in the box marked "inspection". 1018RE&1218RE Operation Manual © Mar. 2021...
Page 91: Appendix 3: Repair & Inspection Report
B-2 Inspect Rim ,Tire and Fasteners B-3 Inspect Hydraulic Oil B-4 Inspect Air filter of Hydraulic Tank B-5 Replace High- Pressure Filter Element B-6 Inspect the Battery B-7 Inspect Drive Reducer Oil Level B-8 Test Oscillate Outriggers 1018RE&1218RE Operation Manual © Mar. 2021...
Page 92 Condition Malfunction D-1 Replace Drive Reducer Gear Oil D-2 Inspect Scissor Arm Sliders D-3 Replace Hydraulic D-4 Replace Hydraulic Tank Suction Filter D-5 Inspect Scissor Arm Bearing User Inspector Signature Inspector Date Inspector Title © Mar. 2021 1018RE&1218RE Operation Manual...
Page 93 4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and marked in the box marked "inspection". Select the appropriate inspection procedure based on the inspection type. Select the procedures as appropriate for the type of inspection. 1018RE&1218RE Operation Manual © Mar. 2021...
Page 94 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

3369re 1218re 4069re

Sinoboom 1018RE Operation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinoboom 1018RE

Summary of Contents for Sinoboom 1018RE

This manual is also suitable for:

Table of Contents