Upgrading Zeppelin Software - Bowers & Wilkins Zeppelin Air Manual

Upgrading Zeppelin software

From time to time it may be necessary to update
Zeppelin's software. Upgrades and instructions on
how to install them will be posted on our web site:
www.bowers-wilkins.com
To install upgrades, you will need to connect
Zeppelin to a USB output on your computer using
a standard USB device cable. This is the same type
of cable that is used to connect USB printers, for
example. If Zeppelin's current software version is
1.3 or later, you can display the version number on
the screen of a docked iPod/iPhone of Group D or
Group E.
For devices in Group E, navigate
Settings > General > About and scroll to
the bottom of the page.
For 1st and 2nd generation nanos and 5th
generation iPod, navigate Settings > About and
scroll to the bottom of the page.
For 3rd and 4th generation nanos and classic,
navigate Settings > About and tab to the 4th
page using the track forward or back buttons,
either on the iPod or Zeppelin's remote.
20