Outputting Video - Bowers & Wilkins Zeppelin Air Manual

Outputting video

Composite video cable S-video cable
If you want to feed images from a video iPod or
iPhone to your television, use either an S-video or
composite video cable between Zeppelin and your
set. If you have a choice, S-video offers slightly
better quality.
If your iPod/iPhone is already playing a video
as you dock it, the picture may not automatically
transfer to the TV screen. In that case, stop the
video, go back a step in the iPod/iPhone's menu,
re-select the video and start it again.
When you play a video on devices in Group E,
Zeppelin software (except v.2.0) forces the video
content to be routed out to its S-VIDEO and COMP
sockets for display on a TV and the picture may not
be viewed on the iPhone/touch screen.
Note: Zeppelin software v.2.0 allows the
operation of the pop-up message "Display on
TV? Yes/No", but was superseded due to a bug
in Apple iPhone/touch software v.3.0 that can
cause the iPhone/touch to freeze if the pop-up is
allowed.
With other video iPods, you can set the video
output state on the iPod itself (Video > Settings
> TV Out >) to be always displayed on the iPods
screen (Off), or always output to a TV (On), or to
pop up a choice message (Ask).
Note: 4th generation nanos display some video
content only at right angles on their own screen.
Zeppelins with serial numbers beginning with
Z-0 and having the originally installed software
will not output video from Group E devices. To
enable video output with these devices, upgrade
Zeppelin's software on our web site
www.bowers-wilkins.com
Download the Zeppelin Connectivity Guide from
our web site for more details.
11