Torque Limit - Toshiba TOSVERT VF-P7 Instruction Manual

RX-CC
Motor torque [%]
100
-10V 0
Title
Selection of power running


torque limit #1

Selection of regenerative

torque limit #1
The torque limit function is active in vector control mode. In V/f constant control mode, square reduction
control mode, and automatic torque boost mode, the torque limit function may not be functioned.
In torque control mode, the values set with these parameters limit torque reference.
(2) Positive/negative torque limits
First, you need to set the polarity of each torque limit. Set  at .
Title
Torque limit

mode (polarity)
a) Limiting the torque with parameters
Reverse
Motor torque [%]
0V +10V
Motor torque [%]
-100
Function
Function
: Power running/regenerative torque limit
: Positive/negative torque limit
Positive
Regenerative Power running
Power running Regenerative
Negative
F-46
RR-CC，VI-CC
100
0
0V 10V
II-CC
100
0
4mA 20mA
Adjustment range
: VI(voltage) / II(current)
: RR(volume / voltage)
: RX(voltage)
: RX2(voltage)(optional)
: 
: VI(voltage) / II(current)
: RR(volume / voltage)
: RX(voltage)
: RX2(voltage)(optional)
: 
Adjustment range
Power running torque limit #1
 :
Forward
Regenerative torque limit #1
:

Default setting


Setting value
