There are two files, a license and FlashLink.exe software installation file. Save these to the PC hard drive. If you do not have a flash drive and only have the license, download the software from the DeltaTrak web site http://www.deltatrak.com/support/software-drivers Note: The license key can be used on two computers.
Import • About - Displays FlashLink software version, provides a link to Help files ColdTrak File Processing • Update - Checks DeltaTrak server for Data Analysis available FlashLink software updates • Exit - Closes FlashLink application About...
The start delay can be bypassed when such action is required, so the device can start logging immediately. To bypass the delay press and hold the START button. The LCD flashes while the button is down. When the Logger starts logging the LCD displays the current www.deltatrak.com...
LCD will revert to current temperature reading. When reports are created at the end of the logging period, waypoints appear as a vertical line on the graph and have an asterisk in the data table. www.deltatrak.com...
This .TXT file contains configuration data in the form of Keyword and Value pairs, separated by equal sign. Some keywords will be easy to understand, below is a table with each keyword and description. If all keywords are correct and the corresponding values are acceptable the Logger will respond with three www.deltatrak.com...
Page 7
Operating state : Waiting=0,Stopped=3 DATE_FORMAT Set date format DATE_FORMAT=0 for (mm/dd/yyyy) (default), DATE_FORMAT=1 for (dd/ mm/yyyy), DATE_FORMAT=2 for (yyyy/mm/dd) TIME_ZONE Time zone applied to all absolute dates LOGGING_INTERVAL Logging interval expressed in seconds START_DELAY Start up delay in minutes www.deltatrak.com...
Need help?
Do you have a question about the FlashLink 40528 and is the answer not in the manual?
Questions and answers