Yamato IC103CW Manual page 20

Functions of the unit are as shown below:
Name
№
Calibration
1
function
2 Setting lock function
Power outage
3
compensation function
Calibration offset function compensates any differences
between the target temperature in the chamber and the
Offset control temperature of the controller (sensor temperature.)
The function can compensate to either plus or minus side
for the whole temperature band of the unit.
This compensation can be set with the SUB MENU keys.
This function locks the set operation status.
The lock can be set or released with the SUB MENU key.
This function returns the main unit operation to the resume
status after recovery from power outage, or keeps the
current stop status.
This compensation can be set with the SUB MENU keys.
4. Operating procedures
List of operation modes and functions
Description
18
Page
P.27
P.28
P.29