Bosch MBA5785 6B Series User Manual And Installation Instructions page 28

en Shelf supports
Keep the PUSH tab pushed back
2.
rail outwards ⁠ .
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
Remove the pull-out rail.
4.
Clean the pull-out rail.
5.
→ "Cleaning products", Page 23
18.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
28
and swing the
1.
2.
3.
a The retainer
4.
Insert the pull-out rail between the two bars.
Push the retainer in between the lower and the
upper bar.
Keep the PUSH tab pushed in
out rail inwards until the front retainer
between the two bars
Release the PUSH tab.
‒
clicks into place.
Pull the pull-out rail out as far as it will go and slide
it back in.
and swing the pull-
is located
⁠ .