Bosch MBA5785 6B Series User Manual And Installation Instructions page 27

Hide thumbs Also See for MBA5785 6B Series:
Table of Contents

Advertisement

17.4 Preparing the appliance for use
following the cleaning function
Allow the appliance to cool down.
1.
Wipe off any ash that has been left behind in the
2.
cooking compartment and around the appliance
door with a damp cloth.
18  Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
18.1 Detach the rails in the main cooking
compartment 
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
18.2 Attaching the rails in the main
cooking compartment 
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
First, push the rail into the middle of the rear
1.
socket 
until the rail rests against the cooking
compartment wall, and then push this back
and detach it
⁠ .
and remove it.
⁠ .
Remove white residues with lemon juice.
3.
Note: White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Attach the shelf supports.
4.
→ "Shelf supports", Page 27
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
18.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
Detach the rails before detaching or attaching the
pull-out rails.
Notes
¡ Depending on the appliance type, you must change
the basic settings for the telescopic rails for appli-
ances with rails and pull-out rails.
→ "Basic settings", Page 20
¡ If necessary, you can use pull-out rails on all levels.
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
Shelf supports en
until the rail
⁠ .
3
4
27

Advertisement

Table of Contents
loading

Table of Contents